Please use this identifier to cite or link to this item: https://elib.psu.by/handle/123456789/48052
Full metadata record
DC FieldValueLanguage
dc.contributor.authorВелюго, Е. С.ru_RU
dc.contributor.authorЕрмак, А. А.ru_RU
dc.contributor.authorЮщенко, В. Д.ru_RU
dc.contributor.authorVelyugo, E.en_EN
dc.contributor.authorYermak, A.en_EN
dc.contributor.authorYushchenko, V.en_EN
dc.date.accessioned2025-07-14T08:21:01Z-
dc.date.available2025-07-14T08:21:01Z-
dc.date.issued2025-
dc.identifier.citationВелюго, Е. С. Гидрохимические модели удаления железа и марганца на кварцевом песке и сорбенте АС / Е. С. Велюго, А. А. Ермак, В. Д. Ющенко // Вестник Полоцкого государственного университета. Серия F, Строительство. Прикладные науки. - 2025. - № 2 (41). - С. 23-30. - DOI: 10.52928/2070-1683-2025-41-2-23-30ru_RU
dc.identifier.urihttps://elib.psu.by/handle/123456789/48052-
dc.description.abstractВ статье описывается сравнительный анализ структурных и энергетических параметров свежего и бывшего в эксплуатации песка и сорбента марки АС методом адсорбции паров воды с использованием порометра BELSORP MAX. Обработка изотерм адсорбции-десорбции выполнена в программном комплексе BELMaster MicrotracBEL Corp с расчетом удельной поверхности, суммарного объема, среднего размера пор и энергии адсорбции паров воды по методам BET, Ленгмюра и Дубинина-Астахова (DA). Наблюдается увеличение удельной поверхности и пористости бывшего в эксплуатации песка и сорбента марки АС, что свидетельствует о структурных изменениях в процессе их эксплуатации: увеличении удельной поверхности и пористости. Полученные результаты позволяют сделать вывод о возможности повторного использования отработанного песка и сорбента марки АС после регенерации, а также о необходимости учета изменений их свойств при проектировании систем очисткиru_RU
dc.language.isoruru
dc.publisherПолоцкий государственный университет имени Евфросинии Полоцкойru_RU
dc.rightsopen accessru_RU
dc.titleГидрохимические модели удаления железа и марганца на кварцевом песке и сорбенте АСru_RU
dc.title.alternativeHydrochemical Models of Iron and Manganese Removal on Quartz Sand and Sorbent ACru_RU
dc.typeArticleru_RU
dc.identifier.doi10.52928/2070-1683-2025-41-2-23-30-
local.description.annotationThe article describes a comparative analysis of the structural and energy parameters of fresh and used sand and AC grade sorbent by the water vapor adsorption method using a BELSORP MAX porometer. The processing of adsorption-desorption isotherms was performed in the BELMaster MicrotracBEL Corp software package with the calculation of the specific surface area, total volume, average pore size and adsorption energy of water vapor using the BET, Langmuir and Dubinin-Astakhov (DA) methods. An increase in the specific surface area and porosity of the used sand and sorbent of the AC brand is observed, which indicates structural changes during their operation: an increase in the specific surface area and porosity. The obtained results allow us to draw a conclusion about the possibility of reusing spent sand and AC grade sorbent after regeneration, as well as the need to take into account changes in their properties when designing treatment systems.ru_RU
Appears in Collections:2025, № 2 (41)

Files in This Item:
File SizeFormat 
23-30.pdf1.35 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.