Please use this identifier to cite or link to this item: https://elib.psu.by/handle/123456789/16842
Title: Влияние технологических параметров напыления и ионного азотирования на структуру и износостойкость газотермического покрытия из высокохромистой стали 95Х18
Authors: Григорчик, А. Н.
Кукареко, В. А.
Белоцерковский, М. А.
Белый, А. В.
Other Titles: The Influence of Technological Parameters of Sputtering and Ion Nitriding on Microstructure and Wear Resistance of Gas-Thermal Coating of High Chromium Steel 95x18
Issue Date: 2016
Publisher: Полоцкий государственный университет
Citation: Вестник Полоцкого государственного университета. Серия B, Промышленность. Прикладные науки. - 2016. - № 3. - С. 94-99
Abstract: Исследуется влияние параметров напыления и ионно-лучевого азотирования на структурно- фазовое состояние, дюрометрические и триботехнические характеристики газотермического покрытия из высокохромистой стали 95Х18. Показано, что в результате ионной обработки при 670…890 K на поверхности покрытия формируются модифицированные азотом слои глубиной от 3…5 до 15…20 мкм. Ионная обработка приводит к образованию на поверхности покрытия твердого раствора γ'N –(Fe, Cr) и выделению частиц CrN. В процессе триботехнических испытаний в условиях сухого трения в поверхностных слоях газотермического покрытия происходит деформационно-активированное γ→α превращение, приводящее к значительному возрастанию износостойкости и микротвердости покрытия. Показано, что в результате ионно-лучевого азотирования микротвердость покрытий из стали 95Х18 возрастает в 1,7…2,5 раза, а износостойкость в 2,3…4,6 раза по сравнению с необработанным покрытием.= The influence of the parameters of the deposition and ion-beam nitriding on the structural-phase state, microhardness and tribological properties of gas-thermal coating development of high chromium steel 95X18 have been investigated. It is shown that as a result of ionic treatment for at 670…890 K on the surface of the coating formed modified nitrogen layers depth from 3…5 up to 15…20 microns. Ion treatment results in the formation on the surface coating of a solid solution γ'N -(Fe, Cr) and the allocation of CrN particles. in the process of tribological tests under dry friction in the surface layers of gas-thermal coating is the deformation-activated γ→α transformation, leading to a significant increase in the wear resistance and microhardness of the coating. It is shown that as a result of ion-beam nitriding microhardness of coatings from steel 95X18 increases in 1,7…2,5 times, and the wear resistance in 2,3…4,6 times compared to untreated coating.
Keywords: Материаловедение
металлургия
газотермическое покрытие
метастабильный аустенит
ионно-лучевое азотирование
сухое трение
деформационно-активированное превращение
gas-thermal coating
metastable austenite
ion-beam nitriding
dry friction
deformationactivated transformation
URI: https://elib.psu.by/handle/123456789/16842
metadata.dc.rights: open access
Appears in Collections:2016, № 3

Files in This Item:
File Description SizeFormat 
94-99.pdf11.96 MBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.